Here is what I would like to do and I'm wondering if it is possible. I have 2 Aironet AP's in a lab environment. The two are mirrors of one another. Both have two vlans. Vlan 1 on both used local radius, a TKIP cypher,EAP. Vlan 2 uses WEP. Can I set one as the WDS and one as the AP and AP to the local radius on the WDS device? I tried this and it really messed things up to the point that no I'm unable to anthenticate. Just a note. I've implamented CCKM on all devices involved and only the SSID utilizing TKIP is being included in the configuration. What I really want to do is authenticate agains the local radius on the WDS device. Thanks, Shawn
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...