Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WLC HA

we have a WLC4404. we want purchase a new 5508             .

its possible setup HA (redundancy) mixing those type of WLC?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

WLC HA

yes, this is possible.  You'll need to run the same code on both of the WLC, 7.0 is the highest you can go as the 440x does not support 7.2.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
2 REPLIES

WLC HA

yes, this is possible.  You'll need to run the same code on both of the WLC, 7.0 is the highest you can go as the 440x does not support 7.2.

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered

WLC HA

Hello,

yes, this is possible. I want to share a  High Availability Deployment Guide, Please visit:

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml

1243
Views
5
Helpful
2
Replies