Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

wlc syslog config

Hi

 

Can anybody Pls share what are the config needs to be done for syslog & how to check WLC is sending logs towards Rsyslog

 

Br/

3 REPLIES
Bronze

 In order to configure the


 In order to configure the syslog server with the CLI, enter this command from the WLC CLI:

    config syslog {ip-address}

and for further detail understanding go through below link.

http://www.cisco.com/c/en/us/support/docs/wireless/4100-series-wireless-lan-controllers/107252-WLC-Syslog-Server.html#backinfo

 

Bronze

For step by step syslog

For step by step syslog configuration, please refer the following link. Under Configuring System and Message Logging Tab.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_troubleshooting.html#wp1161855

VIP Purple

In CLI, it is just simple 3

In CLI, it is just simple 3 line configs as shown below.

config logging syslog host x.x.x.x <- Remote Syslog Server IP
config logging syslog facility local3
config logging syslog level warnings <- Syslog level you want to log

config logging syslog host y.y.y.y  <- If you have multiple syslog host

 

once you did the config you can verify using "show logging" output

(WLC-1) >show logging 
Logging to syslog : 
- Syslog facility................................ local3
- Logging of system messages to syslog : 
 - Logging filter level.......................... warnings
 - Number of system messages logged.............. 968439
 - Number of system messages dropped............. 0
- Logging of debug messages to syslog ........... Disabled
 - Number of debug messages logged............... 0
 - Number of debug messages dropped.............. 2607
- Number of remote syslog hosts.................. 2
- syslog over tls................................ Disabled
  - Host 0....................................... x.x.x.x
  - Host 1....................................... y.y.y.y

 

HTH

Rasika

**** Pls rate all useful responses ****

139
Views
0
Helpful
3
Replies
CreatePlease to create content