i really donot know if QBSS and TSPEC can be used together at the same time in the WLAN (access point send the beacon with the QBSS then the client use the TSPEC) or i just choose only one option (QBSS or TSPEC) in the WLAN
does TSPEC and QBSS work with all 802.11/b/g/a or each works in specific band
ip phone 7921g when it works in 802.11b/g does it use QBSS and TSPEC or only one QBSS or what
In the latest 792x loads, QBSS is used only for display purposes (to display the channel utilization values).
QBSS will be enabled if you have WMM or AP CAC enabled. Not recommended to enable Client CAC as that QBSS version advertised by the AP is not CCA based (does not account for all energy on the channel).
So for CAC with the 792x, we use TSPEC, which will provide inbound and outbound CAC when enabled.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...