Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

WS-C3850-24P with AIR-CAP1552EU-A-K9

Can WS-C3850-24P with POE+   support the  AIR-CAP1552EU-A-K9   without the POE injector?

2 REPLIES
Hall of Fame Super Gold

Re: WS-C3850-24P with AIR-CAP1552EU-A-K9

VIP Purple

Re: WS-C3850-24P with AIR-CAP1552EU-A-K9

If your question around powering up the AP ( even 3850 is not using as WLC), then still it is not recommended. You have to use 1500 power injector to do this.

Below from this 1550 - Getting Started Guide

"To provide inline PoE, you must use the 1500 power injector (AIR-PWRINJ1500-2=). Other power injectors, PoE switches, and 802.3af power sources cannot provide adequate power, which may cause the access point to malfunction and cause possible over-current conditions at the power source."

HTH

Rasika

**** Pls rate all useful responses ****

686
Views
0
Helpful
2
Replies