! ! interface BVI1 Description ASSIGN IP IN VLAN 1 RANGE ip address 10.10.5.3 255.255.255.0 no ip route-cache ! ip default-gateway 10.10.5.1 ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ! ! control-plane ! bridge 1 route ip ! ! ! line con 0 line vty 0 4 login local ! end
1>> Issue the command "show dot11 associations" on Either Root or Non Root to see if we are able to get the associations up and running.
2>> Issue "show logs" and see what is the specific reason the Root and Non root are not associating to each other.
3>> Make sure the antenna allignment is done correctly and bridges are facing each other.
4>> This configuration holds good for any AP which supports Root Bridge and Non- Root bridge station roles.