Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Basic IOS Standalone AP configuration with WPA1-PSK-TKIP


!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname AP
!
enable secret <removed>
!
ip subnet-zero
!
!
!
dot11 ssid mywifi
   authentication open 
   authentication key-management wpa
   wpa-psk ascii <enter text>
!
power inline negotiation prestandard source
!
!
username  <removed> privilege 15 password  <removed>
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
no shut
encryption mode ciphers tkip
!
ssid mywifi
channel 1
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
!

interface Dot11Radio1
no ip address
no ip route-cache
shutdown
no dfs band block
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
hold-queue 160 in

!
interface BVI1
ip address 192.168.1.1 255.255.255.0
no ip route-cache
!

ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login authentication cli
!
end

+++++

1472
Views
5
Helpful
0
Comments