Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot connect bridge to bridge because of low signal quality

Core Issue

The problem may be caused by any of the following circumstances.

  • Too much distance between bridges
  • Radio frequency (RF) interference
  • Misaligned antenna
  • Bad cable
  • Obstruction

Resolution

Try the following suggestions in order to resolve the issue.

  • Ensure that cabling is properly connected and sealed so no moisture can get into the cable. Also check signal loss value with cable type with your cable manufacturer.

  • Make sure there are no obstructions. Trees, walls, buildings, and hills may obstruct your signal path and reduce signal strength.

Problem Type

Device cannot associate

Products

Bridge

840
Views
0
Helpful
0
Comments