Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

How to assign an IP address to a Wireless Bridge


The default IP address for the wireless bridge is To assign a static IP address to a wireless bridge, refer to these documents:

Note: When connecting the PC to the bridge or reconnecting the PC to the wired LAN, it may be necessary to release and renew the IP address on the PC. On most PCs, a release and renew can be performed through a PC reboot. To do this, the ipconfig /release and ipconfig /renew commands can be issued in a Command Prompt window. For detailed instructions, consult the PC operating instructions.

Problem Type

Cannot console or telnet or GUI into a device since the device does not have an IP address



Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 03:33 PM
Updated by: