Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure SSL and HTTPS access to the Wireless LAN Solution Engine (WLSE) so that only some IP addresses can access the WLSE

Resolution

At present, there is no way to configure IP filters on the WLSE. However, one can authenticate users using a local authentication module or using an external server to do RADIUS or TACACS+ authentication. Once you have selected and configured a module, all authentication transactions are performed by the authentication service associated with that module. Users log in with the user ID and password associated with the current authentication module. Note that you must create all user roles on the local authentication module.

Refer to these documents for more information:

Version history
Revision #:
1 of 1
Last update:
‎07-01-2009 03:14 AM
Updated by: