Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure system message logging on an Access Point

Resolution

By default, Access Points (APs) send the output from system messages and debug privileged EXEC commands to a logging process. The logging process controls the distribution of logging messages to various destinations, such as the logging buffer, terminal lines, or a UNIX syslog server, depending on the configuration. The process also sends messages to the console.

Event logging is configured on the Cisco Aironet AP running Cisco IOS  Software through the web interface or the Command Line Interface (CLI). To access the event log through the web interface, select the event log from which you can modify the configuration options and notification options.

For information, refer to Configuring System Message Logging.

Problem Type

Configure / Configuration issues

Products

AP 1100

AP 1200

279
Views
0
Helpful
0
Comments