Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure the autonomous access point's A radio and G radio for the bridge and access point role using the service-set identifier (SSID) via the GUI

Resolution

You can set up each radio in the access point for different functionality. Considering the scenario, this can be done by setting up the SSID for the G radio and another SSID for the A radio. Then, set the role in the radio network parameter for the G radio to access point and for the A radio to the root bridge role.

For more information on how to configure the role in the radio network, refer to the Configuring the Role in Radio Network section of Configuring Radio Settings.

For more information on how to configure multiple SSIDs, refer to the Configuring Multiple SSIDs section of Configuring SSIDs.

Problem Type

Configure / Configuration issues

Products

Autonomous Access Points

Radio Type / Standards

802.11g

802.11a

Role in Radio network

Root AP

Root bridge

Security Options

SSID

Product OS

IOS

Device Access Method

GUI Interface

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:08 PM
Updated by: