Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to troubleshoot the LEDs on the base station

Resolution

If the base station is not communicating with the WLAN, check the three LEDs on the top panel. They report network and modem activity, operational status, and radio activity.

The base station uses a blinking LED code to identify error conditions. This code sequence uses a two-digit diagnostic code that starts with a long pause to delimit the code, followed by the LED flashing red to count out the first digit, then a short pause, followed by the LED flashing red to count out the second digit.

For more information, refer  the following URLs

Problem Type

LEDs

How to...

Products

WLAN adapters (wireless card) / ACU (Aironet Client Utility)

Base Station

Version history
Revision #:
1 of 1
Last update:
‎06-18-2009 04:02 PM
Updated by: