Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to use WEP on third party devices

Core Issue

Need assistance enabling Wired Equivalent Privacy (WEP) on third party devices.

Resolution

Cisco Aironet products can establish 40-bit Wired Equivalent Privacy (WEP) connections with IEEE 802.11b-compliant non-Cisco products. If you want to create a 128-bit WEP link, Cisco products only interact with other Cisco products.

If you are using a third-party device with a Cisco Aironet product, you must set both devices to use 40-bit WEP.

For configuring third party Access point , contact the respective vendor. For configuring  WEP on Cisco client adapters refer Entering a New Static WEP Key  section of  Configuring the Client Adapter

Problem Type

Configure / Configuration issues

Other vendors

Products

Other vendor adapters

Other vendor AP

534
Views
0
Helpful
0
Comments