Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to verify that the access point does not broadcast the service set identifiers (SSIDs)

Resolution

As long as you do not enable guest mode under the SSID Manager, the access point does not broadcast the SSID in its beacons. You can verify with a client and scan for SSIDs in order to make sure it is not listed.

In order to enable guest mode on an SSID, type this command on the access point in global configuration mode:

  Ap#dot11 ssid ssid-string
  Ap#guest-mode

For more information about the access point, refer to the Cisco Aironet Access Point FAQ.

Problem Type

Analyze (examine, manage, test or view data)

Products

Access point

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:11 PM
Updated by: