Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

International power standards for Cisco Aironet Wireless Bridges

 

 

Introduction

 

Cisco Aironet Building-to-Building Wireless Solutions International Power Compliance Chart

 

Core Issue

 

Need assistance locating the Cisco Aironet Wireless Bridge international power standards.

 

Resolution

 

It is important to Cisco Systems that its resellers comply with and recognize all applicable regulations placed on the wireless networking industry. Regulation agencies across the globe have created wireless power standards that consumers must maintain. These power standards are based on the relationship between power output and antenna application. In an effort to assist consumers in meeting all outlined regulations in their area, Cisco Systems has created this power compliance chart for its Cisco Aironet wireless bridge. This chart is for convenience purposes only. Please check with your local regulatory agency.

 

The chart comprises countries listed in alphabetical order. The wattage power settings are in the left column of the chart. Across the top of the chart the antenna power is listed in dBi gain. Compliance can be assured with four easy steps:

 

1. Find your country on the chart. (Countries are listed in alphabetical order.)

 

2. Find the power output of your wireless bridge. (See left column and consult reference manuals.)

 

3. Find the dBi gain of your antenna. (Reference the top row.)

 

4. Cross-reference your power output with your dBi gain. If you find an X, you are compliant.

 

 

 

All Cisco Wireless Networking Antennas Applicable

 

   

American Samoa

Colombia

Mexico

Puerto Rico

Argentina

Costa Rica

New Guinea

Russia

Australia

Ecuador

New Zealand

Saudi Arabia

Bolivia

Guam

Nigeria

United States

Brazil

Hong Kong

Panama

Uruguay

Canada

Jamaica

Paraguay

US Virgin Islands

Chile

Malaysia

Peru

Venezuela

China

Fiji

Philippines

Yugoslavia

 

 

If you do not meet compliance regulations, you must adjust the power output on your wireless bridge to a lower power output setting (consult reference manuals).

 

Problem Type

 

IEEE standards

Power / cable compliance

 

Products

 

Bridge

 

Reference

 

For information on international power standards for Cisco Aironet Wireless Bridges, refer to the Cisco Aironet In-Building Wireless Solutions International Power Compliance Chart