Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The "Object "CalibrationModel#xxxx" does not Exist " error message appears when attempts are made to create a new calibration model with a WCS that runs version 4.0.66.0

Core Issue

An error like this can appear:

"Error:  You must correct the following error before peocedding:

Error: Object "CalibrationModel#5886" does not Exist."

Resolution

In order to workaround this issue, complete these steps:

  1. Try to reinitialize the database with this command:
    C:\Program Files\WCS#\bin>
    DBAdmin.exe reinitdb

  Note:This command would erase the database completely. All the   calibration models would have to be redone.

2. Try again with a blank database, and see if the problem persists.

3.  Uninstall version 4.0.66.0 of the WCS and install version 4.0.96. Then, import the database, and it works.

Refer to these documents for more information:

Problem Type

Error message

Products

Wireless Control System