Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

The user is unable to pass traffic after a remote bridge or Access Point is connected to a switch

Resolution

The switch to which the bridge or Access Point (AP) is connected is configured to prune the VLANs  configured on the bridge or AP. The traffic can not pass. 

Note:: Make sure that the VLANs configured on the AP are not pruned on the connected switch.

For more information, refer to these documents:

Problem Type

Associated but cannot pass traffic to some devices

Products

Bridge

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:30 PM
Updated by: