Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Using the diagnostic commands


You can view diagnostic information about your access point with diagnostic commands. Enter the commands in the Command-Line Interface (CLI) to display the information. You can open the CLI with Telnet or with a terminal emulator through the access point's serial port.

For more infromation, refer to the CLI diagnostic commands table for a list of the access point's diagnostic commands.

Problem Type

Analyze (examine, manage, test or view data)


BR 350

Access point

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 03:41 PM
Updated by: