Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Using WDS with Windows IAS

I am looking for assistance and cannot find documentation on what we are trying to accomplish.

Our current wireless network has autonoumous access points using WPA, PEAP MS-CHAPV2.  Our access points authenticate back to a Windows Server 2003 IAS server.  This works fine.

What we are looking to do is introduce WDS.  We will be configuring one access point as the WDS AP.  What I am unsure about is the documentation talks about creating a username and password.  This seems simple since all of the documentation references using Cisco ACS, but I do not have that available.

I am using the following documentation as a guide, but this only seems to apply if you are using Cisco ACS.

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml

Thanks in advance for your help.

Comments

Thank you for your posting and interest in the Cisco Support Community. We will forward your documentation request to the appropriate team.

For best practices on posting documents in this community you can refer to


https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions


For technical questions related to a Cisco Product or Technology, we encourage you to post on the Network Professionals Forum (NetPro). For your specific issue, you can go to Wireless - Mobility - General forum.

840
Views
0
Helpful
1
Comments