Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

VoIP configuration for SRP 527W

Hi

I recently purchased a 527w and need advise for setting up my existing VoIP service.

The Following are the only details I have previously used with other makes of router but I cant get the CISCO to register with the service so I guess I'm not completing the correct cells in the web interface.

I have 2 numbers with details as follows

Line Number 1
MyNetFone Number 091794**
MyNetFone Password $$$$$$$$
SIP Proxy sip00.mynetfone.com.au
SIP Port 5060
Voice Codec G.729, 40ms packet size
Subscription Id @@@@@@
Service Plan

Line Number 2
MyNetFone Number 091794**
MyNetFone Password $$$$$$$$
SIP Proxy sip01.mynetfone.com.au
SIP Port 5061
Voice Codec G.729, 40ms packet size
Subscription Id ######
Service Plan

Obviously I have @@$$ my password and subscription details, so which cells do I put the above info into? I tried this and several other combinations (again the below id the actual info I put in the cells)

I tried what I thought were the correct ones as follows

Proxy and Registration
Proxy:   

sip00.mynetfone.com.a

Outbound Proxy:   
Use Outbound Proxy:   
Use OB Proxy In Dialog:   
Register:   
Make Call Without Reg:   
Register Expires:    Ans Call Without Reg:   
Use DNS SRV:   
DNS SRV Auto Prefix:   
Proxy Fallback Intvl:    Proxy Redundancy Method:   
Voice Mail Server:    Mailbox Subscribe Expires:   

Subscriber Information
Display Name:    User ID:   
Password:    PasswordUse Auth ID:   
Auth ID:    Subscription IdDirectory Number:    MyNetFone Number
Mini Certificate:   
SRTP Private Key:   

Help would be appreciated

Rob















































1816
Views
0
Helpful
0
Comments