Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Will the boot loader image change if the Cisco IOS Software on an AP is upgraded?

Resolution

The boot loader image does not change if the Cisco IOS Software on the AP is upgraded.

To determine the version of Cisco IOS  Software running on your Access Point (AP) or bridge, use a Telnet session to log into the AP or bridge, and issue the ap> show version EXEC command.

The software version is available on the system software version page in the web browser interface of the device. The software version appears at the top left of most pages in the web browser interface.

For more information regarding the firmware, refer to Managing Firmware and Configurations.

Problem Type

Software issues

Upgrade

Products

Access point

Product OS

IOS

1899
Views
0
Helpful
0
Comments