Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Windows CE does not recognize client adapter

Core Issue

User installs client adapter on Windows CE and the operating system does not recognize the card.

Resolution

To resolve this issue, perform these steps:

  1. Remove &  re-insert the client adapter card  and  make sure card is seated correctly.
  2. Try in a dofferent Slot if available.

Note: Windows CE 5.0 is not supported by any of the Cisco Aironet Client Adapter Drivers and firmware. If Windows CE must be used, move to a different version of Windows CE.

For more information, refer to the Troubleshooting section of Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE.

Problem Type

Device OS does not recognize client card

Client OS Type

Win CE

369
Views
0
Helpful
0
Comments