Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Wireless client card 350 does not connect to AP 1200 but does connect to AP 350.

Core Issue

This could be because the drivers and the ACU utility on the 350  client card is outdated.


Always use the latest version of the drivers and utilities for the client adapters. If the client card is using a older version of the drivers, it may not associate with the Access Points (APs). Download the latest version of the drivers and utilities from the Wireless downloads page. You can also navigate form by selecting TechnicalSupport and documentation------>software download---->Wireless software---->Wireless Lan access--->Wireless Lan client adaptars---->Cisco Aironet  Wireless Lan client adapters. For more information on client adapter software, refer to the Installing or Upgrading the Client Adapter Software section of Installing the Client Adapter.

Note: To download the software you must have a valid CCO account

Problem Type

Device cannot associate


AP 340, 350

AP 1200

WLAN adapters (wireless card) / ACU (Aironet Client Utility)

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:07 PM
Updated by: