Wireless

HiI am getting started keepalive when i check show wism status.We had rebooted our core switch.After this it happened.We had rebooted with the same ios.Also i tried rebooting the wism.I can console to wism and i can see the management ip address.Also...

Hi,     I have two Wireless LAN Controllers 2504 and 8 APs 3502e. The WLCs are running software version 7.0.116.0. The problem is that I don't have the mesh option to configure indoor mesh inside the controller. In chapter 9 of Wireless LAN Controlle...

Hi Is it possible to deploy the Cisco vWLC inside microsoft hyper v? Tried to import the .ova file but hyper-v only supports .vhd.  This links states that hyper-v is supported, but I can't find a guide how to deploy it. I would appreciate if anyone h...

We're getting errors in the MSE server events on 7.6.120.0, but I can't find any information on what these errors mean or how to fix them.AesLocationMathPureJava#railsAndRegionsLineApplyAny clues?thanks,Robert 

Hi Guys, please see below: AP ( 3702i) Mar  1 00:34:49.691: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.*Mar  1 00:34:54.703: %CAPWAP-3-ERRORLOG: Invalid event 40 & state 2 combination.*Mar  1 00:34:54.811: %DHCP-6-AD...

hi all ,our primary wlc has failed and we received a new one from rma.Now If I set ha between the new wlc and existing one.will existing wlc  push up configuration to new wlc (primary)? release 7.4thanks in advance

Hi,We have installed  the new cisco AP 2702i on our new building and we have a bad performance on the wireless network. When I check the AP configuration on the controller I see a strange information, the interface gigaethernet1 is down (no connect) ...

Any possibility a Terrawave outdoor 4 wire/element antenna could be used with a 3502e AP?  Have seen some posts about the 3 ports and different antenna options, but not quite covering this type of mix/match.  Came across this antenna still in the box...

Curious if there is an actual reason in this day and age why the Cisco 3600 series AP running the latest autonomous IOS, will fully accept, detect and configure the RM3000AC wave1 module but still will not let it advertise SSID. I understand that thi...

Hi,We have installed  the new cisco AP 2702i on our new building and we have a bad performance on the wireless network. When I check the AP configuration on the controller I see a strange information, the interface gigaethernet1 is down (no connect) ...

I have have 2x 4404's (2x) and 2x 5508's all are running 7.0.240.0. When I take an 1142 and associate it to a 4404 I can connect a test client using N at 144Mbps and I can get transfer rates averaging 70Mbps (using iperf tests). When I take the same ...

Hello everyone, I plan to deploy about 250 APs in our office. If possible I want to use the vWLC because of its low price compared to a hardware WLC. Since the vWLC is ristricted to max. 200 APs, I am thinkink about to use two vWLCs and put them toge...

we installed a cisco flexvpn solution using cisco 819 with 3g modem as spokes.in order to limit the costs we would like to disable the roaming feature on the modem.is it supported? if yes how?thank you