Experts, Assume the below scnarioWireless Clent = 6000 all AC supportedAP = AC supported 3700 WLC = 55xx or 57xx ??5508 = 8 Gbps throghput5760 = 60 gbps throughput Which controller should i plan for this scnario and why? -Mukesh
Hi,I've 37xAIR-LAP1252AG connected to 2x3750 PoE switches. Some of them (12xAIR-LAP1252AG) are not working properly. 1) On the same switch, the output of the "show power inline" is different whether the AP is reachable or not:**********************AP...
I have a question does the 5760 controller support AP running in flexconnect mode? I've heard that flexconnect was going to be available in the future but I don't know if it is available now. Thanks; Juan
Hi, Spec says that 2600 series access-points are BYOD optimized. We are using 1600 for BYOD. I dont see any issue in the BYOD network. Anyone knows what additional features that 2600 got in BYOD support. thanks,Ramesh
I have a client that uses web auth for the guest wireless. When a users opens up FF, it does not automatically redirect them to the web auth page. However, IE and Chrome work fine. If you copy and paste the redirection page into FF, it will go to ...
Hello all, I am facing the following issue.On our wlc, we have only enabled the UNI-I 5ghz channels.We have recently introduced some new 1532 ap. After joining the controller, i found out that the channel assignment changed to custom for the 1532 aps...
Hello. I'm just looking for some validation of my high density wireless design. Based on a lot of documents I've read I'm trying to get the number of users down to around 10 per AP. The room in question is a conference / board room that has seating f...
hey guys, I have a cisco wlan 2504 controller with two 2702i and so far everything is been good except the printers. Even though my printers are visible on the router and dhcp assigns the correct ip and subnet to them, on every windows laptop that is...
I'm trying to create duplicate SSID's with different interfaces. I'm getting an error that says the SSID must be unique, or have different layer 2 authentication.Our goal is to have users create one profile on their wireless device, and be able to t...
Hi I am trying to upgrade my Prime 2.1.0.0.87 with the release “Device patch “ from Cisco pi211_20140630_01.ubfBut this patch is a WINZIP file, and when unzipping a can’t find this pi211_20140630_01.ubf file ?? What am a doing wrong ? RegardsJohan
I have a WiSM which manages 2600 LAP's. it seems when i add any new ones they join the controller, i can see the config is downloading but they then reboot and start again.I rebooted the WiSM which seemed to resolve this but ive added some more and t...
Map Tree View is blank after migration database from WCS 7.0.240 to Prime 2.0. Is not possible navigate beetwen the maps.anyone had any experience with this?
Hi all, One of my customer has deployed Cisco Prime Infrastructure 2.1 and they are running WLC 4404 version 7.0.250. SNMP v2c community string is configured and the added to Prime but it is not able to collect the inventory and other details with th...
I’m trying to understand the 802.1X clients/modules Cisco offers. I found the Cisco Secure Services Client and the EAP-FAST Module for Win Vista/7. But where do I download or learn more about the EAP-LEAP Module for Win Vista/7?
