Buy or Renew
Buy or Renew
Cisco Virtual Engineer generative AI bot now active in Wireless Discussion Forum. Learn more.

Wireless

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
Labels

Forum Posts

Start a conversation

Resolved! Co-Channel Interference, RRM & MCS rates

Question for the gurus!Does RRM use MCS rates for AP neighbour RSSI?  If yes, then in a dense .11n only deployment would it be a good idea to remove low rates in the same way as we do for 802.11ag?  I'm looking to enable 16-QAM and better only to see...

Resolved! WLC authentication LDAP

Hello.I am going to install a WLC with two wlan (A and B). User on both wlans will authenticate via LDAP in one Microsoft server.Is it possible for a user to authenticate and access wlan A but not B? In WLC the path configured in WLC to query the ser...

jcarvalh by • Level 1
  • 454 Views
  • 3 replies
  • 0 Helpful votes

Resolved! Problem Airprint with Standalone AP1602

Hello,We have 2 Standalone AP1602. They works great with perfect coverage. However, we have the Problem that we cannot print from our IOS Devices over Airprint. With the old Linksys APs this works, but after we implement the new APs Airprint did not ...

WCS LobbyAmbassador defaults

We are using WCS 7.0. We have several local LobbyAmbassador (LA) accounts. Every LA account has configured LobbyAmbassador defaults with option „defaults editable“ unchecked. Lobby ambassadors are not allowed to change setting for guest users. Now we...

gliderman by • Level 1
  • 449 Views
  • 0 replies
  • 0 Helpful votes

Using Cisco WCS with Microsoft IAS

Hi.I have two 5508 and WCS 7.0.172. I want to user Active Directory users credintals to login on ther WCS. Have a configurated NPS role on server with windows 2008 r2.I have read this http://zmq503o1.wordpress.com/2008/01/06/using-cisco-wcs-with-micr...

Wireless LAN

I have installed a 5508 WLC in HA mode. The problem persists with the LAP in the area. We had an external vendor doing site survey and accordingly installed LAP.but now the issue is some users don't get connectivity beyond 11m from LAP and some u...

WLC 5508 Web Auth and EAP / PEAP

   Morning all, I'm looking for some clarification.Current setup:I work in a school, a few years age I installed a 4400 WLC and several APs as a proof of concept exercise to see whether wireless technology would be of benefit to teaching and learning...

Wireless signals fluctuating

Hello All,I have read a few posts on the similar topic but have not been able to find out exact cause of signal fluctuations in my network, this is the reason I want to seek help of you all in solving this issue. Here is what the problem looks like:F...

pnagpal by • Level 1
  • 1245 Views
  • 3 replies
  • 0 Helpful votes

Resolved! Webauth page on WLC 5508

     Hi ,I need to download a login banner page on our WLC 5508 version 7.4.100.60  but i am getting error and the logs is showing the following :*TransferTask: Sep 11 11:05:04.248: #CLIWEB-3-BUFFER_TOO_LONG: cli_web_api.c:3240 Buffer for Login Banne...

Resolved! Is a controller required for roaming?

We've been using single stand-alone Aironet AP's at our small branch offices with great reliability and success over the last 3 years.  However, we recently acquired an office with only a few clients (10), but it is an old warehouse so it has a lot o...

5508 controller config

I'm having a problem that I am sure is just a quick fix changing something in the configuration of my 5508.  I am unable to ping a device on my wireless VLAN from a device on the same wireless VLAN.  I am able to ping, and be ping from devices on oth...

mlicardo7 by • Level 1
  • 678 Views
  • 10 replies
  • 0 Helpful votes

Resolved! High Gain antennas and Ssid

             1. I've been having a discussion with my peer about client power requirements. We know the grayling a high gain antenna is used popularly in stadiums has 13dbi gain on 2.4ghz and 7dbi on 5. EIRP= Tx + 13dbi  - Loss(insignificant here), a...

View All
Review Cisco Networking products for a $25 gift card