Wireless

Hi All,We set up a Cisco WAP for one of our clients. It is running WPA2-Personal with AES. One of the bosses at this client recently bought a MS Surface Pro and is unable to connect that to the wireless. Some research into the issue shows that this i...

Hello!We have a WiSM2 (version 7.4.110.0) with approx 200 APs. We are doing RADIUS authentication via a PacketFence backend. Everything usually works fine, but we are having an intermittent issue...The WiSM2 gets its VLAN assignment for a client from...

We have two WLC 5508 and one foreign guest anchor WLC at the primary data center, also a 5508 box. I would like to connect an AP directly to the guest anchor WLC through its guest VLAN interface, so that the same configuration is applied to it as oth...

Hey All,I've installed a second Cisco ACS server for redundancy on our WPA2/AES/802.1X wlan and I was wondering how this will affect user connections. I have 2 ACS's with 2 different certificates and they are setup as radius 1 and 2 under this specif...

Hey All:Im having an issue with some 7925G, the A / 5Ghz inside works like a dream, when we go outside the phones start going crazy, we have 1310G's outside using 2.4GHz, the phones just wont roam. If you stand 30 metres from the external AP towards ...

Supported User CountOnly fifteen users are allowed to connect on the WLAN Controller  WLANs provided on the 600 series at any one time. A sixteenth user  cannot authenticate until one of the first clients de-authenticates or a  timeout occurred on th...

Is it good practice anymore to enable "Aironet IE" on the WLAN? I'm wondering if the additional information that that is beaconed out (AP hostname, etc) is worth it.

I have a question about a wireless bridge connection between 2 Cisco 1310g bridges.Several subinterfaces are made and going over the wireless connection.One subinterface has made for public internet access.The customer wants to shape this to a maximu...