Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

Hello everybody,I'm trying to find out if the Wired 802.1X capabilities associated with the OEAP-600 extend so far as including the dynamic assignment of attributes to the User's session? VLAN assignment would probably be the most useful, but QoS, Ra...

                   Hi everyone,this is my issue, I hope someone can help me with this:i am new to wireless and i have two sites in two diffrenet subnets connecting together by MPLS and I need to have a wireless controller on one site to manage both l...

yasaman64 by Level 1
  • 9649 Views
  • 26 replies
  • 0 Helpful votes

                   I need to knows the compactibility of AIR-CT5508-A-K9 WITH AIR-RM1252A-E-K9 / AIR-RM1252G-E-K9                              and other question is the name that one company for generate certificate RSA on line this comopany have to ...

LWAP in the WLC shows up with primary SW Version (7.2.110.0) and Backup SW Version (7.2.103.0).what is a purpose of each software image? if backup SW version isn't upto date (i.e. what would happen if backup SW version is say 7.0.116.0). will there b...

gavin han by Level 1
  • 781 Views
  • 3 replies
  • 0 Helpful votes

We have 6 1262 APs and a 2504 WLC.  5 of the 1262 appear correctly with 2 radios.  One of them shows 1 radio.  See screen shots below showing model numbers and interfaces on the AP with one radio available (All other 1262s show 2 radios as normal).  ...

Hello all,     I'm looking into upgrading our 4400 series controller to 5508's.  Currently we have a few sites that have 8-9 4404 100AP controllers and I'm looking to condense these down to either 3 5508-500 or 5 5508-250 depending on cost.  I'm wond...

Resolved! WCS- Map Editor

Hello guys!Im currently working with the WCS- Map Editor. Now my questions is - am I able to display my drawn walls, doors, glasses, etc. in the "floor view" ?The version I am using is 7.0.220.0It would be very nice, if someone could help me out, I s...

Hi There,I have upgraded the software version of a WLC 5508 that was running version 6.0.182.0 to 7.0.235.0 version. Looking at the show sysinfo on the controller (as shown below), I notice the Field Recovery Image Version has the previous version. A...

egua5261 by Level 1
  • 7351 Views
  • 3 replies
  • 0 Helpful votes

Hello,My problem, in a nutshell, is that clients do not get an IP from an external DHCP server when connected to a guest VLAN.My current setup is:Native VLAN 1 (192.168.2.x)2008 DHCP Servers2504 WLC5 AP1142ASA5510 routing between the VLANs and config...

I have got a wireless project with WLC  main office and have 10 sites where ap's are there and ap's getting registerd .we need 4 ssid in all branches same .ssid guestssid scannerssid uservlan 600 main office for scanner 192.168.1.0in branch vlan 600 ...