Wireless

Hi!We got some serious issues to get APs running on a WLC 5508 (7.0.116.0). The APs were added and configured in the WCS, but no SSID can be found by clients (802.11b/g Network Status is enabled).The radio led is blinking green on the APs which indic...

I have never actually needed to use the service port of a WLC until today.  We found an urgent need to tftp to a controller in the DMZ, and found that we could get to it easily because of change requests, etc.We configured the service port to 192.168...

Keep getting DHCP timeouts 169.254.x.x addressing.  I think that the client laptop is not giving a response to the REQ from the DHCP server.  Am I correct in my interpretation of the debug?00:21:d7:93:f9:40 from Disassociated to Idle*apfReceiveTask: ...

I have cisco LWAPP 1242 AP already joined controller but 802.11b/g shows down on the radio 0 interface. I tried to enable it but it comes with an error" Error in enabling admin status". I have resetted the AP to factory default settings and even repl...

Can anyone recommend a GPRS/GSM signal booster solution? I am looking to boost the GPRS/GSM signal in a sports hall to help service chip n pin transactions. I have looked into getting analogue lines installed and other alternatives but this seems to ...

Hi,I have Cisco AIR-AP1252-AG-A-K9 Access Point and 5GHZ radios are not working but interface status showing is up and running but signal is very weak I think it's working through only internal antennas when i connect external antenna even the signal...

(I have by mistake posted this as well on SMB wireless area)Hi Collegues.My  question is very simple - from wich source does the WCS application  inherit the time and daystamps when generation and printing guest user  accounts?I have tried changing t...

Hi all,I am using an 877W as my DSL router and trying to use Apple TV or other Apple Bonjour services over Wireless. It is simply not working although I tried several IGMP configurations. I've seen some references to 877W issues but they were all abo...

Guys,I have 4 Cisco Aironet 1140. I open a web browser IE 8 and type their address "http://<ip address>". Then I enter my username and password in the browser and successfully login to the access point.But, There is something strange, why I only see ...

Dear support,I do have a Cisco router and Juniper firewall, which allow me to connect to internet.Internally after the firewall, i connect it to switches and wireless AP.Both switch and wireless AP must be able to talk to each other, when user pc con...

Hello,On advice of our supplier I've bought an Cisco Aironet 1310G, purpose was to connect 3 sheds who are about 100 meter apart from each other to the internet, a default ADSL router. It is connected with an Aironet Power injector LR2. The range of ...