Wireless

Hi today my wlc 5508 crash. after trying to get access via sp. i doesnt reponds. so i rebooted. in the sh tech i saw this message which i gues indicates the RC of the failure.    ANY IDEAS...***********************************************************...

Hi All,I have the 1152 connected to a Linksys router. My PC is connected to the same Linksys router. My PC is 192.168.1.101. The AP is 192.168.1.102. I can ping it fine. I put 192.168.1.102 in my browser and I get nothing. Says IE cannot display the ...

Hi All,I got my hands on a used 1252 wireless AP.  How do I reset the password, or reset the thing to factory default?  Thanks - Joe

Hi,I am trying to convert an LWAPP to autonomous but I can't. On the privilege mode of the LWAPP AP, i am trying to input the command below, but it is not recognized. please advice on this. thanks!archive download-sw/overwrite/force-reload tftp://<IP...

I have a client with a 2112 WLC and 1252AG radios. The clients work fine, but an SNMP management server can not reach any of the clients over the wireless. Before the WLC and new AP's were installed, they were running older Cisco Autonomous AP's and ...

Hi Guys.we are trying to configure WLC 2112 with LAP 1042 but getting following erros on LAP1042.It show the Ap is not supported in controller version 6.0.199.4*Jan  5 16:52:13.397: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: ...

Hi everyone,I've recently installed the localisation appliance MSE and it seems to communicate fine with my Controllers WLC using the NMSP protocol.However, I have a problem with this specific protocol (NMSP), I can see in the loggin on different Hos...

Hi everybody!I'm getting the following error while trying to start MSE Platform (AIR-MSE-3355-K9):air-mse-3355 login: rootPassword: Last login: Fri Aug 26 02:51:02 on ttyS0[root@air-mse-3355 ~]# /etc/init.d/msed statusSTATUS:MSE Platform is down[root...

Hi guys:I have a 5508-WLC appliance and configured multiple ap-manager interfaces to balance the join request from LAPs and the load.I went to console port from some LAPs and saw that there was that balance among multiple ap manager interfaces (Dynam...

I have already converted the ap from light wieght to autonomous code.  I have placed an IP on the FA0 interace and have saved and bounced the device.  I cannot ping it when connecting the device to my laptop.  Tried both a straight-through and crosso...

Hello,I have a scenario where we haveCisco 1300 Outdoor APsCisco 3600 Indoor APsWLC 2500Now i need to integrate the WLC with Windows 2008 AD for authentication.The idea is to let the users authenticate via AD for accesing the wireless network.Can som...

Hello all,I'm using a WLC 5508 and light weight 1142 AP's with software version 7.0.116I  wonder why there is no cli-clear or cli-reload command if I am  connected via SSH/telnet to an access point. When I connect through  console port there are this...