Wireless

I have configured my switches, firewall and WLC for a new public access VLAN and WLAN.  I've configured the interface and VLAN and I have everything working pretty much like I want it to.The client is now asking if there is a way we can force a redir...

Hello,   My client want to check who owned a certain IP address on the WLC and from which AP he was associated. I looked at the system logs in the GUI but couldn't get beyond 6 hours. Is there a place I can download last day logs from CLI/GUI? Or Can...

We are currently deploying multiple 3502 AP's and a WLC5508. Is it recommended to put the access points that are one the same site as the controller on H-REAP or put them on local mode. The WLC5508 has a max uplink of 8 Gb can that be a limitation wh...

When on the management interface the clients can't get dhcp but the AP's can on the same vlan.   I've tried enabling and disabling dhcp proxy,  and using a remote dhcp server as well as the internal server.   This same config works on the 4402 we're ...

Hi,What's the best way to identify the best suited adapter for wireless surveys - to match that of the client.We are currently surveying & deploying Air-Lap1042's to connect to IPAD2's using netstumbler (only 1-2 AP's required).We are using Network S...

I have a WLC  2016 and a LAP1131AG plugged in to one of the POE ports. On firmware 7.0.116 I have no problems powering the AP.On  6.0.222 I get an error: HIGH_POWER_CLASSIC_NOT_CONFIGURED AIR-WLC2106-K9and the usual radios off.How do I get the 2106 t...

I'be upgarding and downgrading a WLC 2106 from 6.x to 7.x a few time, now my AP, can no longer join...logs from WLC - any ideas?Oct 06 20:20:38.517: [ERROR] phy.c 157: link on port 3 change to upOct 06 20:20:36.490: [ERROR] phy.c 147: link on port 3 ...

Hi all,I have a problem putting a Cisco 1141 AP in repeater mode with a AP HP Procurve.Root AP is a the Procurve, but when try to put the Cisco AP with same SSID, Authentication, etc, I receive this error:%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, c...

I'm trying to set up web authentication for our guest wlan.  We have a WLC 5508 and I was able to get LDAP working sucessfully.  Does anyone know if there is a way to read user accounts from a group instead of an OU?  I was hoping to allow individual...

I need Cisco EAP-FAST installation exe urgently.(for Windows7 32bit)can anyone help me?

I'm trying to download a code update to an Anchor WLC but it keeps failing saying no response from the tftp server. If I look at Firewall logs I see the tftp connection being allowed and then a blocked connection to destination port 29002 on the tftp...