Wireless

I am trying to connect communication between 2 buildings. In the main building, I have a Cisco aironet 1100 connected to the wired Lan. In the other building I am trying to install a Cisco 1242AG. I am in the setup interface of the 1242Ag under the s...

I am working on Guest WLAN deployment using a anchor WLC and NAC Guest Access server for authentication. I now have a requirement to prevent Guest machines from logging in with the same set of credentials. I already have concurrent connections set to...

Hi,I have two 1522 APs and able to associate to WLC4402 successfully via wire but cannot wireless communication from one of AP1522 which changed the role to MAP and disconnect wire.Advise please the configuration steps or CCO URL.Thanks in advance,

I'll keep this as short as possible. I have a couple hundred 1131AG APs deployed with WiSM controllers. Controllers and APs are running 5.1.151.0. The environment has been stable for over a year. We recently had to make some changes which required us...

Hi,Has anybody been able to successfully get a Zebra printer QL420 Plus connected to Cisco LWAPP/CAPWAP APs ?We are using WPA2 - PEAP with Verisign Signed Server Certificate.

We recently scrapped our old Symbol APs in favor of 1142s with WiSMs. Unfortunately some of our older laptops with the Symbol Spectrum 24 LA-41x1 cards are having a very hard time getting a good connection with the Cisco gear in place. We've got th...

Anyone running 6.0 and/or ClientLink? Let's hear some feedback...

(I included this question originally as a reply to another post when I probably should have started it as a new conversation thread):I have two rather old 1220B units. I've configured/installed 1300 series wireless bridges, but I'm unclear on whether...

I'm trying to configure guest access using a WLC with no authentication. In other words, I'm not using ACS or RADIUS. I want to allow users to walk in and attach to network with no auth. Two issues: One is that they are associating to the AP, but not...

Hi,I was wondering if there was a way to allow broadcast traffic through one virtual interface only? Reason why I ask is that previous to migrating over to the WiSM, we had 2 SSID's on the WLSM, one that allowed broadcast traffic for specific clients...

Is there a way to configure guest access on a WLC using open authentication? I don't have a WCS server and do not want to use web based. I want something very simple that allows guest to automatically connect to APs. Thanks

Hi Sir,I've customer enabling WPA-PSK using the longest characters (up to 63) instead of the minimum 8. Will it cause any performance degradation on the wireless LAN. Can anyone share further technical information on WPA-PSK?Thanks.Delon

Hi,I have a Cisco 870 Wireless-Router.I would like to turn the wireless interface off between 9pm and 8am when it's not being used.Is there a way this can be done automatically.i.e. shutdown 802.11 interface via a routine job (or maybe via .TCL scrip...

Running Symbol Barcode scanners on a WLC4402 + 1131's running 4.2.207.0. The WLAN is currently open for testing purposes. The guns associate and are placed in a run state on the WLC and sees that the station has an IP address, however you cannot ping...