Wireless

4402 - Ver 5.1.151.0AP 1242I keep receiving these errors from WCS about my AP's droppingAP 'AP NAME' disassociated from Controller 'CONTROLLER IP'. (6 times)Then 2 minutes later I get another message that it associated. This will happen many times th...

I need to create two vlan data and voice, with SSID, when I create two vlan with 31 for data 103 for voice with two different SSID, what ever vlan I created first is get broadcast, second one is not get broadcast, please let me know what I am missing...

I am walking into a site that already has the WISMs setup. There are 2 switches setup with VSS and there are a total of 4 WISMs. When I do a show wism status there are 3 of the service ports that show down. One port down on one of the WISMs and bo...

We have 2 recently deployed APs in a building where electrical work was done yesterday. Prior to this work the APs worked fine, now they will not power up.The indicator lights on the power injector a blinking red Fault line in the center, and the AP...

I plugged in SFP modules in the WLC ports and the port status (Controller -> Ports) shows SFP Type as Unsupported. The modules I tried are GLC-SX-MM and GLC-LH-SM; neither of which work, link is down down. Any ideas?

and how does it compare with your competition? Also, how do your products differentiate rogues from allowed AP's? Is it through wired arp detection alone? If so, how do you know which arp is rogue? Does this require all AP's be Cisco? Also, what...

Hi all,I have 2 WLan Controlers, managing about 120 LW APs.Could u please, take a look, in one of the Controlers Config, to see, if there are any best practic that i could apply.Security issues, etc... Best RegardsmBruno Petrónio

Hello, I am having issues trying to convert from autonomous to lwapp. This is the first time working with this model, we have 1242's which are lwapp and working fine. The version I have is 12.4(10b).JA1 but when I use the upgrade tool and try to use ...

hi all, One of my customer place, they want to python script in switch to control power(poe) like 6 Am to 6 Pm it need give power to AP and ^ PM to ^ Am to stop. So Ap will work within these works. I s it possibleThanks in advance.Regards,Chandru

I have a Cisco Aironet 1242AG and when I try to manage it by the web interface, it does not appear the main menu. Do you know how can I solve this issue?

Hi Expert,My client requested to confine the wireless coverage within the office building so that external ppls will not get a strong signal unless it's within the buildingMy question: How do achieve this in WLC? By adjusting the power under the radi...

Hiwe have purchased 30 AIR-AP1252g-e-k9 access points which as I understand it come with a 2.4Ghz b/g/n module in them.I also think that we have the 5Ghz antennae.My first question is that is there a way to tell which antennae they are?Second if we h...

Hello guysI need implement Vlan in network where i have a cisco 350 series WGB, cisco 1300 series Access Point/Bridge and Cisco 1200 series Access Point/Bridge.My wireless network schema illustrated in a NetWork Description.vsd file(Microsoft Visio F...