Wireless

Folks, I have a customer in hospital, who requires to have wireless deployed everywhere. The fact is , customer is budget concious, so I designed in such a way to place it in corridors , so that wireless coverage could get inside the rooms, but the d...

i got a problem,i need to do a wireless survey by cisco software ACU ,and i set up a most simple lab environment ,and i have set my profile in the ACU ,simply configured the ssid with no encryptionbut the ACU always notice me , your adapter was not a...

I want to build autonomous wireless N network with about 10 indoors AP and 3 Outdoors AP. I have Cisco 3560 PoE switchs. The network will have IP phones. Can you guide me to the right AP to buy. I forgot to add that I need this deployment to be done ...

My wireless clients don't seem to be able to pick up an IP address from the router. Wired clients connect fine.Didn't have issues with previous D-Link router. Not sure what I've missed.Any help/suggestions would be greatly appreciated! Thanks

Hi,I'm trying to config nokia E60 with cisco Callconect with Leap.In WLC (4.2.172) I have configured in WLAN Profile , WPA+WPA2-> WPA Policy and TKIP -> CCKM.I'm trying to use Local Eap, i have defined user and password in controller.In nokia device ...

I want to build autonomous wireless N network with about 10 indoors AP and 3 Outdoors AP. I have Cisco 3560 PoE switchs. The network will have IP phones. Can you guide me to the right AP to buy.I forgot to add that I need this deployment to be done ...

I am trying to convert an AP in Thailand from autonomous to lightweight through WCS. I was able to add the AP as autonomous in WCS, but when I try to convert it to lightweight it always fails on loading recovery image. I have turned on tftp debugging...

Is frecuently find in the enterprise WCS the following message "IDS 'Deauth flood' Signature attack detected on AP 'XXXXXXX'protocol '802.11b/g' on Controller 'x.x.x.x'.The Signature description is 'Deauthentication flood', with precedence '9'.The at...

Hi, anybody knows if there's a newer enterprise mobility design guide than 4.1? Some of Cisco's WLAN new features such as CAPWAP is not included in 4.1. It's time for Cisco to prepare a new design guide.

Hello How do I add a lightweight access point AIR-LAP1131AG-A-K9 to the network and then have it managed by the LAP4402 controllerthank you

anyone have an idea or what antennas i need to use?thanks

Hi,I've seen that, also with a single WLC, APs exchange neighbour informations and, based upon thins "neighbour packet", several Logical RF-subgroup are established.http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.sh...

Hello,I have 22 aironet 1130 access points installed in a large building together with an ACS 4.1. what is the best solution to manage the APs, provide QOS and centrally authenticate and control the AP.Will enabling WDS on AP provide radio management...

Anybody knows when will the CCIE Wireless LAB test be available in Australia?

Hi,I've an installation of WCS 5.2.130 with a win2003 server ( with 8G RAM and 3.4GHz proc ).I found several time the APACHE SERVER and WCS stopped while DATABASE and HEALTH MONITOR are runningI've seen a bug related a logon/logout from the phisical ...