Have problems connecting 802.11b clients to 1131ag e-k9 accesspoint. need some help. thanks Eddie
Have problems connecting 802.11b clients to 1131ag e-k9 accesspoint. need some help. thanks Eddie
Dear Cisco specialists,could you help me with recovering 1310 access point? Yesterday I tried to download IOS via console and decided to change speed on console to speed up the process. I put 'set BAUD 115200' in rommon mode and after this lost comun...
I am getting ready to install a wireless network with WLC4404, ACSSE and about 100 AP's. The current network is a Novel network and every user has an RSA token. We want to be able to have the users use their RSA token with connecting to the wireles...
HelloI am trying to upgrade the IOS of my AP1200 but I am recieving this messageAP1200-BUP1-2#archive download-sw /overwrite t<A HREF="javascript:newWin('ftp://10.50.194.12//c1240-k9w7-tar.123-8.JEA2.tar')">ftp://10.50.194.12//c1240-k9w7-tar.123-8.JE...
I want to hook a Wireless 1142 N Access Point up to our Cisco 3560 Powered Switch on one of the gig SFP ports. 1) Are the SFP Ports powered just like the standard ports? 2) If I connect a 1000Base-T Ethernet Gbic into the SFP Slot, will it transmit...
Hi all,I have qs for SCE 2020.What is the server h/w, s/w requirement for those 02 SCE applications?Appreciate quick reply!!!
Hi Guys,If I have a dynamic interface that is connected to a subnet where the router interfaces have DHCP servers configured under the helper address commands, do I need to configure the DHCP fields under the dynamic interface configuration?I have h...
hi All, I am trying to configure the domain name in wlc but i am not geeting the option. If i checked the sh cdp nei on switch where my LWAPP connected....its showing... puna-wpi-ap-1g.cisco.com.... where i think cisco.com is default domain. So pls g...
Information:2xWLC(WiSM)version 4.2.130 2x6509 WCS 4.2.97.0Scenario: When trying to simulate a failure of one pair of controllers all the LAP failover to the second pair of controllers, but the WLAN ids are all rearranged ie. if a LAP used WLAN 1 and ...
Hi for all, I need to make a downgrade in 4402 WLC from 5.2.157, that has some bugs, to 4.1.192.35M. In the release note 4.1.192.35M shows: "A downgrade to mesh releases 4.1.190.5, 4.1.191.24M, and 4.1.192.35M from non-mesh release 4.2 is not suppor...
Hello,Need a little help with frequencies. Does IEEE 802.15.4 radio channels 11 through 26 possibly interfer with 802.11b since they both use 2.4GHz?
Hi,we use 3 WLC4404. Two of them on location A (130 APs), the third on location B (40 APs). Both locations are connected via 10GE-MAN, and 10km away. Now one could say I could put the controllers of location A and location B into two different mobili...
Hi,I have a doubt with the 1522 Access Point antennas configurations. The document show that there are two options for antenna configuration based on how the access point is mounted. ----------Cable strand-----Pole MountAntennaPort1---------...
Even though the controller will allow 16 WLAN's, have you seen traffic issues if there are more than "X" number of WLANs enabled on any AP?
Hi.A catalyst 2950 has 3 vlans: - Native VLAN 1 with no ports associated- VLAN 4 for the users- VLAN 5 for the network management (with VLAN 5 ip address 192.168.7.29/28)I want replicate the same VLANS on the AP (1130AG): VLAN 4 for the users and VLA...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-12-2024 05:27 AM | ||
04-10-2024 01:01 PM | ||
04-05-2024 06:44 PM | ||
04-04-2024 03:18 AM | ||
03-27-2024 07:38 AM |
User | Count |
---|---|
12 | |
3 | |
2 | |
2 | |
2 |