Wireless

Hi,I have a network with LAP and Autonomous APs. i have a 4402 WLC and WLSE. will WLC automatically register LAP and WLSE automatically register Autonomous?Walter

I am seeing 5 to 10 WPA MIC errors from different clients and different APs each day via WCS. Is this something I should be concerned about? Is there a way to change a threshold so I only get these if there are an excessive amount? FYI: I currentl...

Hi,In our customer's Wireless LAN. There 40 x 1130AG LWAPP AP's and 4404 WLC with ACS 4.1 for the Authentication of the Wireless Clients who is trying to access the LAN. Customer is not having Cisco Wireless Clients. They are willing to use 802.1x au...

Yesterday we installed the new WCS version wih a customer, and they are now running into problems when applying a template.When they change something in the AP configuration and try to save or apply, they get an error message telling them the they ar...

I need a Power Injector for a Cisco 521 Wireless Express Access Point. What is the P/N, AIR-PWRINJ3 or AIR-PWRINJ4? Or 802.3af at switch only?

Guys (& gals)Looking to roll back a classroom controller to 4.0. Is it possible to roll backwards both Primary and backup images to 4.0 (to prevent students booting to 4.1) 4402 controller.thanks Rob

Hi,I have to migrate 44 IOS AP configured with static IP address. Current customer AP network is 10.10.3.0/24 for 43 devices and 10.10.4.0/24 for 1 AP device. Customer now doesn't have ,unfortunatly, a dedicated mgmt network and they don't want to cr...

Hi GuysI am having an issue with a WiSm module running 4.1.185, where connectivity to the blade is very intermitent, it connects for about 10 minutes and then dies, the only way we get it back is by cold starting the module by pulling it out of the c...

Hello everyone. We have recently migrated from Autonomous AP's and WLSE to LWAPP and Wcs/Wisms. I have been looking at the alerts with Rogues and have a question - im sure its been answered before but I didnt find what I was looking for so far - What...

I have a Cisco 1300 bridge and a 3com 3CRWE91096A bridge, I am having trouble making them talk. Any help is greatly appreciated.

Hi all I have install the AP 1131AG and set security WPA-PSK, I found problem that some notebook connect to AP for 3-4 minutes,and then disconnect,reconnect,disconnect.Please recommend me.Thank you.

Do you have to put both the 2.4GHz and 5GHz antenna's on a 1250 series Access Points to get maximum efficiency??, especially since it is a dual radio device.

In WCS (Wireless Control System) Help i found this description: "Enter a Retention Expiration value in minutes. This determines how long the received information is stored by the client before it is overwritten. The default value is 24 hours (1440 mi...

Hi,first one, i'm sorry for my english.I have a very big problem with the bridge. I can't configure the nonRoot bridge. It's not possible for me to turn on the radio. The software and hardware are always disable... The SSID management is configured w...