hi,Any one help me out i have to configre IPs on ASA 5510.where i will put this IPS(inside,outside or DMZ)Gigabit port of ASA SSM 10 module will be used or notplz helpand inform me from basics
I have 7 Cisco 1231G Access Points in my warehouse. Currently they are void of any kind of security other than not broadcasting their SSID. Our current equipment on the warehouse floor does not work with any of the security protocols. However, we are...
Does anyone know what would cause this error?Equipment is Cisco Wireless Controller 4402Error:Basic type or enum can not be nested, error in the tool for h2Basic type or enum can not be nested, error in the tool for XML_crc_file_sizeValue = 481 for X...
I'm planning on moving from 4.1.185 to 4.2.130 tomorrow late but am having an issue in testing. My original plan was with 3 4404's and one of them being emtpy, have the 3rd running 4.2.130 and just move AP's from one of the older controllers over to ...
Hi I'm in need for a repeater on my WLAN.I got a wireless environment where I use WPA2/AES/PEAP/MS-CHAP-V2. I use a Windows radius server. Are there anyone who knows how to configure the WAP. Please advise. Thanks a bunch.
Is it possible to have 2800 router GigE interface subnet and Integrated-Service-Engine/wlan-controller interface in same subnet by using ip unnumbered command? I'm trying not to create a new subnet for ISE, mgmt IP, and AP mgr IP. I added them alon...
I'll try to give as much info as I can but I'm not an engineer for our network. We have the AIR-AP1030-A-K9 access points in our environment. We also still use hard wired jacks as well. Some users running Windows Vista randomly drop the wireless c...
Hi, I'm using a central Radius Server and have leap and eap-fast working fine, but when the wan link fail(local authentication) the new user that try to conect via leap get authenticated but eap-fast fail.any ideas?. Im using wlc 5.01
Hi,I've a customer currently having kerberos user database. I proposed to him to implement ACS to enable 802.1x on wireless client. Can ACS support or integrate with Kerberos User Database? If yes, any user guide which list out the steps on doing so?...
Hi everyone,Is there such a concept as a standard (read-only) password and enable (config) password functionality on the WLCs?Would be handy PS. we use a TACACS server for access.Cheers,Ken
Hello all,Reading the following documenthttp://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#tpcaCan some explain to me a little better what the "Power threshold does"Dont know if its me, but I am finding the text ...
How can I configure a SSID that able to support WEP & WPA on the WLAN controller? The reason I ask because we are currently have LEAP/WEP and we want to move forward to PEAP/WPA. I have to use the same SSID with 2 type of encryption to support the t...
hi,i have about 400 ap`s some with CDP some without, how can i apply the CDP setting to all AP`s via my WCS withouh overwriting the individual settings for each ap on antenna,channel,name,power etc..i.e just activate that setting globally on all AP`s...
I need help with configuring my WLANS with 802.1x security....Is it possible to have one WLAN authenticate to a certain group in Active Directory?For Example:WLC IP Address: 1.1.1.20ACS IP Address: 1.1.1.10----------------------------SSIDS:1. Corp...
Hi NetPro Forum,is it possible to take the Cisco Aironet 1240AG Serie Access Points for Point-to-Multipoint installations??For example one 1240AG AP in a central area with antenna AIR-ANT5160V-R and maybe two 1240AG AP's with antenna AIR-ANT5195P-R i...
