Hi,We are running a WCS appliance (Upgraded from WLSE) v4.2.62.0This is running a Linux Distro and I have found refernce to a file called ssl.conf from within httpd.conf for the SSL settings.Within this file is the Cipher setup string which include L...
Hi,I have a question about wireless WMM.... looking at a paper about it, the paper talked about 802.1p tagging... doesn't this assume that WMM is being used on a host that is trunking? Also, i read that WMM & DSCP qos on the AP can't be enabled at t...
Anyone seen the following problem?I've set it up for WPA-Enterprise (TKIP) and we get all the way through the authentication and the 4-way handshake, and then it sends me a group key which looks like this:0xaa 0xaa 0x03 0x00 0x00 0x00 0x88 0x8e 0x01 ...
Can we schedule a daily task to shut down and bring up the RF of the APs using WLC or WCS?
hi every body!can anyone give me a link on Lwapp? i did not have any luck on google. thanks alot!
Hi All,As I type the WCS Home page is reporting that I have a total of 59 rogue APs in the 'Rogue Detail Summary" table. However, when I click on the red underlined '59' WCS takes me to the rogue AP page and, guess what, the page is blank! Up until a...
Hi,I was just wondering if anyone has found a neat way of securing the Ap1010 access points?Does anyone sell kensington lock systems short enough to use on these?thanks,Matt
Hi,Could you please tell me how many channels are supported on one Cisco Aironet 1130AG...I means the numbers of users that could be supported by one Cisco Aironet 1130AG.Thanks in advanceBest RegardsMohamed
Do you know how many client can connect on a 1242 ap? I an deployment for conference room for 300 clients.
when i update my 1131 APs, WLSE send this message ;Inconsistent device state found:CISCO-DOT11-IF-MIB cd11IfStationConfigTable.cd11IfStationRole must be in the range [1..11] (was 0)"
HiI have 2 WLAN Controllers in different cities. When I authenticate via the 1 to a local ACS server it works but from the other one I get "EAP Type not Configured" on the ACS logs. Both on the same OS, same ACS server and identical configuration. On...
Hopefully this will be an easy and straightforward question to answer: Can I setup DHCP assigned IP addresses and Static assigned IP addresses simultaneously on the same WLAN? Assumming that static addresses are already allowed on the controller/Wi...
HiI have tried to get video streaming working over wireless. I am having problems getting it to work on a Cisco 877w. It works on a Speedtouch wireless router.Setup:PC running Tversity media server located on 192.168.1.10 - LANXBOX 360 receiving th...
I am just wanting to check and see if I have good signal strength, hard to find documentation.I am using 802.11a with the 1400 outdoor bridges. Signal strength is -35. I am used to 802.11g where it is usually -45 to -65 that is considered good, wha...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-12-2024 05:27 AM | ||
04-10-2024 01:01 PM | ||
04-05-2024 06:44 PM | ||
04-04-2024 03:18 AM | ||
03-27-2024 07:38 AM |
User | Count |
---|---|
13 | |
4 | |
2 | |
2 | |
2 |