Wireless

I am just wanting to check and see if I have good signal strength, hard to find documentation.I am using 802.11a with the 1400 outdoor bridges. Signal strength is -35. I am used to 802.11g where it is usually -45 to -65 that is considered good, wha...

We are using Live Communictions Server (LCS) 2005 and Office Communicator (MOC) 2005. We would like to protect this traffic. I am wondering how would you do it? I thought about using nbar rtp video, but was curious, does the MOC client use a speci...

Dear experts:I have a Cisco Access Point, connected to a Windows Server 2003 network with DHCP enabled.The wireless card on my new Latitude D530 is not getting de IP address, instead it gets an odd 169.x.x.x number. (Windows XP Pro)If I manually set ...

After an upgrade of both controllers on a WiSM module from 4.1.171.0 to 5.0.148.0 the first stays in"Operational Status of the Controller : Started KeepAlive"Even after setting to factory defaults or repowering the module.Any idea what's problem

I'm running 12.2(18)SXF11 on a cat6509 with two WiSM module; one module is fine (after many reloads...) but the 4 Gib-ports of the 2nd controller are not assigned to the auto created Portchannel (Po290)Any manual intervention is denied.What to do her...

Hi All,In the WLC deployment guidehttp://www.cisco.com/en/US/docs/wireless/technology/controller/deployment/guide/dep.htmlIt has a very nice and easy way to understand how traffic is passed from the wifi device to the LAN device as listed below.Now, ...

What, if any would be the best solution to deal with users connecting to a wired infrastructure but also connected to another organization wireless? We want to only permit wired when connected. The end users are not domain controlled but 802.1x aut...

hi,we are using 1130 AP with WEP encryption and MAC filtering iknow this is weak but i don't have extra budget to implement ACS, my questions:is there is any better security method to secure the wireless traffic without implemnting ACS?! can I use WP...

Hey guys - hope everyone's doing well. A client is looking to move away from using static EAP to some better form of security using Cisco ACS. Unfortunately the laptops belong to students so they don't know what cards or OS they 're running but mostl...

When using the WiSM blade, do you have to have a WCS as well?

We implemented NAC on the WLAN.will the CCA Agent work with the PDA's?thanks for anywone!

I want to enable the DHCP server on the 1240AG. I only want to give IP addresses to clients who connect on the 802.11g radio interface and not on the 802.11a radio interface or the Ethernet interface. Is this possible, if so how? (As a compromise I w...

I currently use secure ACS 4.1 and I wanted to know if I could use tis with my 1240AG AP. I am looking to be able to use AAA to log into the Access Point.Can this be done? Will iot be the same set up as a router or does it need something special?

I admit first off, I am not very knowledgeable about wireless. I have a building "L" shaped each 150' long. I have a network on the end of the L and want to provide wireless access to all rooms. I have a cable modem already installed and working n...

Hi,We currently have around 300 1131AG AP's that are being setup in WCS 4.0.96.0It seems around 30% of them have problems where the OPER STATUS cannot come up.When going to an AP configuration, and then the Radio interface config, if we try to check ...