Wireless

I've got an internal (foreign) controller configured with both our internal SSID, as well as with a guest SSID. The controller is anchored to a DMZ-based guest controller. mping and eping all work, and clients can associate to the guest controller....

I know in pre-4.x WCS, the coverage maps didn't take into consideration AP's on floors above or below - has this been addressed in 4.2 or 5.x?Also, are the 1131 AP's supported in an upright orientation instead of just the ceiling mount orientation?

I?m trying to use a "one time" password i my radius solution then working with management through the GUI and https.( One time password works for the CLI)I have enabled the "Credentials Caching" but still it does not work as I expect.The webserver on...

hi alljust wondering if ap`s would benefit from a static address rangepresumably they collect the same address after lease expirynow i need to find 10 new addresses for new non wireless equipment n order for the server team to have a nice continous a...

HI all,We are using WiSM(ver 4.2.99), LAP1131AG, ACS4.1(PEAP, MSCHAPv2) andinterworking with Active Directory.The WLAN service and client authentications are working very well. The wireless encryptionis WPAv1 (TKIP). The problem is taht the wireless ...

Just installing 4402 with v5 and I have a hard time getting my PC on an AP but I do see it under Rogue Clients.How do I trouble this issue and how do I remove it.ThanksMaTT

We've had 4 Aironet AP 1131AG wireless access points working for sometime. Now, the users cannot get an IP address and get onto the network. The DHCP server is up and running just fine. The WAPs do not give out DHCP leases. The only thing that ha...

For guests to be able to easily access our wireless network, the Layer 2 security is Open, with Web Authentication implemented at Layer 3.The problem I have is with having no layer 2 security (open), is that my dhcp pool is utilised by devices that m...

Hello , some one snd me the correct procedure to upgrade the firmware on the Access point AP 1231 ?Thanks a lot

An old CISCO AIRONET 1240AG SERIES 802.11A/B/G ACCESS POINT datasheet details using the 2.4 GHz radio as the AP and the 5GHZ radio for backhaul. Repeater mode isnt used.Is this a supported configuration as I cant find any configuration guides for it....

Greetings all,I am receiving these error msgs (WARN: 1/Invalid traffic from multicast source address 4b:15:e6:d7:00:d0 on port 2/18) on my access switches referencing the ports that connect to my 3 WLC's at 2 different campus locations. The WLC's ar...

HiI have setup my mobile devices to authentication by MAC address on to ACS. I'm using CISCO 1200 APs all over the building.I've followed ALL the guide docs and set everything up including creating the MAC usernames in ACS and placing them in a group...

WCS 4.2.62.11WiSM controllers 4.1.185Is there any way to schedule a WiSM controller's upgrade? We would like to upgrade our WiSM controllers from 4.1.185.0 to 4.2.99.0 through some kind of scheduler. We could download the new image to the WiSM blades...

When broadcasting the SSID, is there any way to prevent all the probing machines from showing up in the client summary area? I'd like it if I only saw my associated clients instead of all these other "false clients" if at all possible.