Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

I have some access-points (AIR-LAP-1231G-A-k9) working perfectly with the WLC. However, when I put the console in the access-point it asks me to enable password default. I would like to change this password, as I do that?

I am setting up a 1200 AP. If you go to >Network Interfaces >Radio0-802.11g >Settings, there is a setting for "External Antenna Configuration". I am using an external Hi-gain antenna. Do I set this to enabled? And if yes, it doesn't want to accept th...

jbunch619 by Level 1
  • 448 Views
  • 1 replies
  • 0 Helpful votes

Can anyone provide any info about how integrate nokia eseries phone with ccme(where download phone software, license and so on)THX...Alex

Is it possible to setup An Aironet 1231 (Fat-AP) to work via wpa, by itself?IF so does any have any links or docs showing setup?Thanks,Pat

Hi all, can anyone tell me how i do this so my other infrastructure access points can authenticate and register with my master access point, I have set it up in the local radius server properties but im getting this error"No Radius hosts configured o...

Hello, I am having Cisco AIR-AP1220B Series AP. It is not booting. It gives following message while booting Testing DRAM...(press <esc> to bypass)DRAM OKPower-on reset.Copyright 1996-2000 Cisco Systems, Inc.Copyright 1984-2000 Wind River Systems, Inc...

vsawant79 by Level 1
  • 219 Views
  • 0 replies
  • 0 Helpful votes

Hi all.I am upgrading some AP firmware on our network. We are using a cross between AP350s, (which i keep telling them to get rid of), AP1200s, and AP1242s.We still don't have a Wireless Lan Controller, so I have been upgrading my 650 APs individual...

matthogue by Level 1
  • 965 Views
  • 8 replies
  • 0 Helpful votes

Hi,Looking through the text in cisco,if i am deploying a single wireless subnet of 192.168.1.xand i had 2 different model of LAPhow should my dhcp server config be?ip dhcp pool LAP_DHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.254 o...

yenlung by Level 1
  • 224 Views
  • 1 replies
  • 0 Helpful votes

I have a new customer site that has a wireless network for mobility within the office space. I got reports of very slow network connectivity and network outages on the wireless segments. After investigation, I discovered that the area had been floo...

Hi all, can anyone tell me how long it takes for WLSE to backup using ftp?I cannot get it to work, it gets stuck on collecting data.any ideas