Wireless

I have a 2611XM connected directly to the internet with a small PC network on the other side of the router. I would like to put an ACL on the public interface to block viruses and hackers. I am looking for a list of commonly blocked ports. Is there ...

I am trying to find a way to measure traffic through our wireless network. We're LWAPP to 4 controllers and we have MRTG graphing the trunks. Is there any way to use WCS to get traffic stats based on floor, building or SSID? (Streaming Traffic only a...

We are currently using a Nortel 2270 (going to end-of-life) along with Nortel Baystack PoE switches and Nortel 2230 WAP's. Cisco has since bought out Nortel AiroNet. What I am trying to inquire about is:-Are the Nortel 2230 WAP's compatible with a Ci...

We have AP1210's trunked to 3550/3560 access switches which are inturn trunked to two wireless core 4006 switches.RSPT is configured on all switches. When a topology change occurs, RPST is very fast in moving the root port (~1 sec) but the designate...

hii am using above model of access point without controller.For that we tried to convert LAP to autonomous mode but didnt get success.Here am attaching log viewer of tftp server.

We have migrated some 1242 APs to LWAPP.They work fine, but when using the Aironet Site survey tool, the AP name & IP Address is not displayed. This is different to the autonomous APs that have not yet been converted. This is not a serious issue, but...

Good Day,I have a small wireless network with a 2106 controller and 1131 APs. We rent conference rooms to the public and had envisioned limiting access based on a user authentication against a radius server. So I was disappointed when I realized ther...

I have recently set up WDS at a remote campus. I scheduled a radio scan for 4:00am so as not to interfere with active users. The scan completed but not successfully. I got an error message regarding the WDS and I can not determine the reason. I h...

I am looking for the correct antenna for a aironet air-ap1242ag-a-k9

Hi,I have a bunch of Aironet 1230 units. I was wondering is it possible to do a sort of holding page or website for advertising before users then moved onto the web. Basically I want to setup both charged wireless access and non charged, but also hav...

Has anyone had any problems with iTouch devices not connecting to their wireless network?The WCS 'sees' the MAC address of these device but they never successfully associate. There is no further information on the WCS.Our network is a Cisco LWAPP ne...

Does 2106 wireless LAN controller support use of Etherchannel?I want to be able to aggregate several of the ports together if possible to provide more trunk bandwidth to a 3560 switch.

Greetings,I am planning a new install with 1250 APs. This structure is steel so I have to plan for both indoor and outdoor AP deployments. Indoors, I am planning to use the 5gHz radios in order to allow for more channels, Outdoor I am lookng for advi...

Hi!I have a 1200 series LWAPP. It has the default configuration which means it has configured the static IP address 10.0.0.1.How can I change the address or how can the AP discover the controller address?Ana

Dear all,I have problem with my AP. I'm using 3 cisco 1100 AP for my connection. All of the AP using one SSID named "PASO" and act as root (connected with wired LAN). From yesterday my AP always down frequently. Client can't find any available netwo...