Wireless

I was wondering if it is possible to determine which SSID's are available on a group of LWAP. If I want a special SSID to only appear in a certain small group of LWAP (say a single building), but there are many more LWAP on the same WLC that I dont w...

There's a page on the 4800 about "Tip". What is it and how does it relate to the config on the 1200?Here's an excerpt of the 4800's config:Aironet AP4800E V8.24 warehouse10 - ...

Hello,I'm not sure if this is a bug in the GUI or Software I have trid this in both GUI and CLI.I'm trying to redirect a Wired WLAN to an external Web-Auth server, I'm already doing so successfully with the Wireless lan.Here is the process :Wlans ->...

Hello,I'm experiencing some problems with IP redirection function with a Aironet 1240AG series.I would like to provide an access to our network to our registered users.When the user starts his notebook, he opens a web navigator and types any URL. The...

Dear All, could you give me some advice to configure wlc with 2 lwapp, i did try to used 1 lwapp ( 1242 ag ) and it's work, but when i try to connect with 2 lwapp ( 1242 & 1131 ), i can't associated with lwapp 1131 ag, i did used same configuration f...

Good Afternoon,Running WCS version 4.1.185, with Cisco LWAPP 1242 access points. Have configured the controllers to perform "Dynamic AP Tx Power", Have found an issue where the power level on the some AP go down to 6 - 8. Removing an AP does not c...

A project we're running is deploying 5,000 linksys APs in our network in a month. Unfortunatly none of our current tools can manage them and our ops staff isnt large. I've got the traditional tools WCS and WLSE, but linksys is unsupported. Anyone hav...

work group bridge with client Vlan is correct according to the graphic that attachment?what is the configuration according to the graphic?THANKS

Guru's, We have a client who is using WLC, WCS and a location appliance.With normal setup, it takes the location appliance half an hour to show actual movement, that is, half an hour later.When aggressive load balancing is enabled, things speed up to...

hi, nice to meet you all.

If you have a 1242 sold as LWAPP can you convert it to IOS?

I have a WISM running DHCP for a WLAN. Is there a way to put a static reservation on the pool. I know the alternative is to move DHCP to an alternate machine (linux or windows DHCP server) and point to it. I would love to keep the DHCP server runnin...

Hello,We are using a Cisco Lightweight Wireless network with around 100 AP and 3 controllers 4402 in L3 mode.We have a new Video system with Wireless 802.11b remote control. The thing is this system work only with mac address, so we need direct Layer...

I bought a Linksys WAP54G yesterday to see whether my 871w is faulty. (Constant signal drops).While I was testing, I noticed that WAP54G has a better signal strength than the 871w. What's interesting is, Linksys WAP54G only has a max power output of...

Hey All,I have just configured a Cisco Aironet 1200 Access point in Autonomous mode.The plan was to use a MS IAS radius and PEAP to authenticate users.But I have a problem with this. When I use Cipher TKIP there's no probelm connecting to the wireles...