Wireless

Dear Member, I am using 1242AG as outdoor access point for my design, i have to cover all the building with outdoor access point,I am in need of help to find the distance covered by an 1242AG Outdoor AP. As 1242AG can be used as Bridge and AP. SO i n...

Hi, I'm running an 877W at home with my main VLAN as a BVI between the wireless and switch ports. Historically wireless clients on the native VLAN could connect between themselves (ie ping, windows shares) but in the course of playing around with c...

We are about to pull these things out. TAC cannot find the problem. Customer had ap350s and runs fine over their wan. Tried to put h-reap with local switching and it has been nothing but a nightmare. clients disconnect from ap yet controller shows th...

Hi We just implemented a WLAN controller version 4.2 but i have some issues. I create 3 ssid one of them communicate with a radius server for user autentication but it wont work properly some user can log in to the wireless ssid and others don't.

We have initially installed IOS-based 1130 APs. If we would be upgrading it to LWAPP mode, could we pushed IOS-to-LWAPP upgrade thru the network? what procedures are required?

We've been asked to get wireless access to all rooms in a hotel, which is 20 stories.I'm trying to figure out the best way to do this; and the thing that makes it difficult, is that we have no way of running ethernet to all of the APs due to the desi...

Hello, I'm in charge of setting up a WLAN for macintosh and windows computers that are not managed by the local staff. The goal is to provide access to local servers. At first we went for a webvpn on an ASA, but it currently does not support Macs. ...

Hi all, I have to manage a group of AP1240.Now, every AP is in AP role and trasmits 2 vlans. I read that if I configure APs as repeaters, they transmit each other only native vlan. If I am between 2 APs I receive 4 ssids (2 for every AP) with a high ...

Hi all and Happy New Year!In my effort to kick the new year off right, I have decided to upgrade my WiSM's. I really want to have 16 VLAN capability with my wireless network and so I am wanting to know if anyone has gone to the 4.2.61.0 code and if ...

Hi everyone. Hope you all had a good new year. Bring on 2008!I looking into a wireless network at my school and have previously had real bad experience with wireless. The school I previously worked had wireless and I think the reason why it didnt wor...

I'm trying to configure a LAP1242 using the WLCM. Is there a basic setup guide available anywhere? I've done the searches and found lots of stuff, but none of it is "start from ground zero".2811w/WLCM - 2960 - LAP1242FA0/0.100 - wired clients 192.168...

Hello all,I am going to implement Wireless LAN in my new office, I will be using Linksys Wireless Router,can you please tell me how much area it will cover, I mean in rooms, or I have to add Access Point for each Room..Regards,Junaid

Hi,How can I ensure good line of sight with the 1300 bridge?.I definitely know there is a way out but don't know how.Any ideas please?Regards,Penbee