Wireless

I just upgraded to 4.2.62.0 and I have found one strange error. I go to configure >access points> click on an access point to configure and I get this message.Error(s): You must correct the follow error(s) before proceeding:Error: Object "Switch" do...

Our company recently installed 40 plus access points for a client covering two buildings. The technician did not record the serial number or Mac address of the AP's when installed. I know need to map them in the WCS. I am wondering if the Cisco 27...

Hello everyone.Can an 1240AG, working as a workgroup bridge, associate to MESH infrastucture? I've read the WGB FAQ (doc id: 8018) but I didn't understand the LWAPP AP support WGB topic.I would like to implement an MESH infrastucture but I have some ...

I saw this statement made in an older posting:"Given that one AP will never really push more than 18Mbps of real throughput anyway (yes, even if all clients are running at 54Mbps), I'd be surprised if you actually have any contention worth worrying a...

is it possible to build a hotspot using only access points? can an ap or two be used to act as radius servers? is there a cisco guide for this?

Hello all.How does an external server used for L3 web authentication send credentials to the wireless controller?

Anyone have any experience with this card? We purchased 2 for doing site surveys, but on one of the machines the Aironet Desktop Utility does not work. The other machines are fine. If I have Windows control the wireless it will connect and all of ...

I have an AP 1242.Is there a command to see what users are using this access point?regards and thanks

I have recently upgraded my wireless network by converting from autonomous to LWAPP. I have several Symbol PPT8800 handhelds I am using for AdminRX application using LEAP and 128 bit WEP. Once I converted the 1242 AP's to LWAPP and installed the con...

Hi,I am using Cisco 1242AG AP with wireless lan client adapter (CB21AG) cards on Linux laptops. I set the data rate, say 36Mbps, for the laptop during association. The association works fine and the laptop shows the associated data rate = 36 Mbps. Bu...

HelloHas any one seen this error on a Cisco 4402 Wireless LAN controller:0 Mon Sep 24 10:51:00 2007 Decrypt errors occurred for client 00:19:d2:65:09:a0 using WPA key on 802.11b/g interface of AP 00:0b:85:8d:45:40 1 Mon Sep 24 10:51:00 2007 Decrypt e...

I currently have a WLC 2006, but would like to know what kind of traps all of your WLC's support (specifically the Model 2006) by version.Current firmware is v4.0.206.0I can view the mib files, but it doesn't tell me which WLC and which version is su...

We have multiple AP's with a mgt VLAN, internal VLAN, and guest VLAN. The AP's connect to our switch core, but I need to secure our internal network from the guest wireless. Guest wireless should only go out to Internet. Attached is our AP and Swit...

Using 2811 with integrated WLCMI have 2 SSIDs, business and guest. The business is only for employees and guest is for everyone else. MAC filtering is in place for both and I have per-user bandwidth restrictions for the guest SSID. I now need a way t...

For what it's worth,I recently discovered that when you have multiple controllers and want to implement Mobility Groups, more is needed than simply entering the same Default Mobility Group Name for each controller within the mobility group. The foll...