Wireless

I have two WDS AP's in two different IP subnets at two different buildings. One WDS AP is working great and is registered with all other AP's in its subnet and it is authenticated with the WLSE.The other WDS AP is a new one I have added to service a...

My setup is basic with ap-manager and management interfaces both untagged and two dynamic interfaces on VLANs 1 and 2. The WLC2106 is connected to a L3 C3560 through a dot1q trunk native VLAN 4. Ap-manager and management interfaces are managed from V...

Hello,I have 2 BR1310G's that are currently part of a test network. Eventually we'll deploy outside but for now I need these two bridges to work inside our building on our test network. The question is, what is the minimum distance these should be ...

Our Customer wants to buy the cisco AIR-LAP1510AG-K-K9.When we design the mesh Ap(AIR-LAP1510AG-K-K9),What I purchase the accessories except for the AP.For example, Is the PowerCord included? or separately added?Also, Is the power injector included? ...

Hi,I have Layer 3 design "routed port" between access and distribution switches. I have also two wireless controllers.As this design, every access switch users are using unique subnet, and let us say that i have three LW access points, every access p...

I lost the static ip for my aironet and i cant reset it due to the fact i need the ip to access all configuration methods. Pllzzz Help

I am using a 3560 on Root-Bridge side and a Cisco 2960 on the Workgroup Bridge side. Cannot migrate Vlan info to 2960 switch, thus cannot re-assign switchport access on a port to any VLAN other than the Native VLAN. Any way to make this happen withou...

I have set up my access point (Cisco Aironet 1200) by assigning IP address, SM, DG, DNS. I have also setup my Wireless Client LAN adapater card with its own IP Address, SM (Same as access point),DG (Same as access point), DNS (Same as access point). ...

Hi, I have a problem with getting a 7921G phone to associate with the AP. Several Laptops can associate with the AP, but when i configure the phone, it does not see find any wireless networks under the Survey\Site Survey section. Should this field ...

i format the 1231 access point flash after i try to send file through x modem its give me a error permission denied how can i solve this problem

I installed an WLC526 , i connect all the six AP521 but Im having problems, there are three AP521 that do not appears in the WLC.The aps are good. The aps and WLC are in a vlan alone. The switches are non cisco. The APs are conected in acces ports.Th...

What is the command line entry to disable the SSID broadcasting on an 1811W.On the Aironets we use "no ssid acmewidgets" but this is not an option on the 1811W.We do not use the GUI configuration....CLI only.Thank You

The APs (Cisco 1242) in my total LWAPP environment send out regular WLCCP broadcast and unicast frames. What purpose do these serve in an LWAPP environment? If there is no purpose and the frames are only for mixed legacy autonomous environments, is t...

Hi,In my scenario,there is a VLAN configured floor wise ie.,first floor as VLAN 2 and so on for 8 floors.All the pcs are getting ips through dhcp server and ip helper configured in core switch.Now in one of the floor Iam connecting Cisco Aironet for ...

hello experts!!!can the 1230 ap be converted to lwapp using Ciscoworkds LMS 2.6?