This is my first time setting up an IPSEC tunnel between two routers. Can someone recommend a document that can help me configure a tunnel for two routers to be connected to each other through the Internet?-Shikamaru
We configured clients policy (all default settings) for web auth and WPA wlans. From time to time, I can see some clients are excluded with reason "802.11 assoc failure". What could be the reason for "802.11 assoc failure"? Could wism exclude the cli...
Does anyone know how or even if I can export my flooplans from WLSE. The WCS doscumentation mentions how import floorplans that where extracted from WLSE, but I can not find out anywhere how get the floorplans from there appliance. I will have a heck...
A client of mine has corporate clients setup with 802.1x authentication. Is that sufficient and secure by itself. I Would like to put these users in the DMZ and ensuring LAN access via VPN (authentication using acs / ad integration) be a better desig...
Hi,we have pix515e, ver 7.0(4). We have made access through cisco vpn clinet for our clients. Radius server is placed in our inside network. everything is working fine for 4 days, after that we need to reload the pix. When the problem start, user is ...
I have two sets of AP1310 bridge and yagi antenna to connect them but realized need a repeater between them due to line of sight.I'm thinking purchase another AP1310 bridge with two Yagi antennas with pointing one(right) to Root and the other(left) t...
We have 2 1410 bridges, separated by approx 1 mi, that we will be relocating to new facilities. Assuming that the bridges are reinstalled and generally aligned, what is the procedure for fine tuning the alignment? Do these bridges need to be set ba...
We have been experiencing major issues recently with the connectivity of 2 Aironet 1310 bridges that are about 300 yard apart. They have been up and operational for nearly a year and within the last week they cannot negotiate a stable rate (1-54Mb). ...
Hi EveryoneIam a electrical technician in AustraliaI have instaled 2 larg instilations consisting of over 100 ap and 40 1300 bridges.Iam haveing a problem with low power on the 1240AG (powered by Injector)when used in conjuction with 1300 bridges.I h...
Hi,I've acquired a cisco aironet 1200 series wireless access point and want to upgrade it to the latest IOS software. However there appear to be 4 different versions I can use:12.3.8-JEB1(GD)12.3.8-JEA2(GD)12.3.8-JA2(ED)12.3.11-JX1(ED) How do I know...
I have two WLC's(4402) I have done an IOS upgrade to the first WLC and taken the second out of production for now.When I put the second WLC back into production in order to perform the same upgrade am I able to stop my AP's from migrating back to the...
I have recently started seeing an issue on my network and I need a better way to handle it. I have about 15 Aironet 1200 AP's and I do not have a central controller, they are all individual and running the newest IOS. Is there a way I can see very ...
Has anyone setup a WLC 4402 and few 1130AP's on their network? Here's the scenario we have VLAN's setup on our network. We want to be able an employee can connect to the internal network and public connect to a DSL Internet. I got the internal employ...
