Wireless

Hello everyone. We have a customer with about 12 1410s... they just upgraded the code on them and now have horrible performance even just opening up the configuration webpage. Anyone had similar issues? The release date of the code was May, so I w...

I have a Cisco 1310 root bridge and a 1310 non-root bridge . it worked fine for a year, I then installed one more 1310 as a non-root bridge now I?m seeing both of my non-root bridges dropping offline more and more. I checked my first non-root bridge...

I have a wireless network setup with 2 Cisco 1230 access points. Both access points are setup with DHCP but have different adress pools. I have the access points setup so i can roam and switch access points automatically but i always keep the IP addr...

facing problem with wireeless.Client are not getting ip from my 1231 AP.configures two ap with same config. but facing problem with only one.Pls guide me on the same

When a guest user first connects to the internet via my controller, the guest gets prompted for a web authentication certificate and I was wondering if there was a way to get that to stop. I am doing external web authentication and I don't want that...

1. WiSM code 4.1.171. When a user login using a wrong password and failed, WiSM still counts it as a login session. So when the same user try to login from another computer, he may get the error about too many login sessions. I think if the login fai...

I am having an intermittent problem with clients not receiving DCHP assignments when connecting to a 1310 in non-root (with wireless clients) mode. The 1310 is associating with another 1310 in root mode (with wireless clients) via an infrastructure s...

I am looking for the IOS command that shows what users laptops are using a 1240. On the web interface under asscoiation tab it shows the device type, name ip address. Is there one for IOS commmand line?

Hello, my company would like for me to create a webpage for users to view the wireless coverage areas in thier location. We have a 50 buildings each with 3plus floors. I was wondering if there is a way to recreate these from WCS or have a webpage p...

Can anyone remeber what the command is to make the LED flash on the 1130AG Access Point?

How can I discover lightweight 1131AG Access Point using 2106 WLAN Controller.

somebody knows how to use(configure) the network routes in the wlc 4402?

hi all,when i config WCL 4402 like:IP on Management Interface: 172.16.1.1 255.255.255.192dhcp: 172.16.1.1IP on AP-Management interface: 172.16.1.2 255.255.255.192dhcp: 172.16.1.1i make scope on WCL: 172.16.1.20 - 172.16.1.40i connected WCL4402 and AP...

i wanto upgrade 1131ap to lightweight ap throuth WAN,can use the upgrade tools2.05 do it.thanks.