I see the error message "dot11_mgmt: bad cookie returned from driver" when clients try connecting. What does this mean? I cannot find any documentation for this error message on the Aironet 1231.
I see the error message "dot11_mgmt: bad cookie returned from driver" when clients try connecting. What does this mean? I cannot find any documentation for this error message on the Aironet 1231.
Hi allMy company want to manage all Autonomos APs of branch-offices from head-offices.Link from branch to head-offices is 256 kbps.May I use WLSE for this scenario ?Help me, plz.Thanks
We are going to set up some Cisco 1310 wireless bridges at a few sites - a Root Bridge outside a main building, and a Workgroup Bridge at a remote trailer that provides ethernet connection to a switch within the trailer. We're debating what wireless...
Hello all,I have two 1310's running in bridge mode that at times encounter problems with dropping connection.The only thing I see that may be at issue here is a large number of "Jammer Detected" however I can not seem to locate any information on it....
Hello all, hopefully someone out there can help me!A WLAN is deployed in England and is therefore subject to ETSI rules. The EIRP (Effective Isotropic Radiated Power) rule for ETSI countries, stipulates a maximum of 20dBm EIRP. This is further broken...
hi!I have little problem with the Ssid Override. I think it is a liitle problem but i do not find the solution.when i try to enable ssid override i do not see the them. I have completed all steps: create wlans, enable wlan override, select the aps an...
Has anyone started to use the new Vocera-enabled MC70 PDAs from Symbol/Motorola? I was wondering if anyone could tell me what they use for their WLAN hardware, and if they are CCX compliant.Thanks,
Hello,Under 802.11b/g settings for controller templates in WCS there is an option called ?Fast Roaming Mode.?What does it do? I haven?t been able to find any documentation on it. From what I?ve seen, it just says check to enable it.We are having so...
Hi How many cisco access points should be install(Cisco 1200 or 1100...) in the 300M X 150M warehouse? Access points will connect with Cisco 4400 Series Wireless LAN Controller.Thanksben
Does anyone know if the last cisco secure ACS server support EAP-TTLS(i don't mean EAP-TLS) authentication?And in case of a positive answer how to configure it???
Hi,I have co convert ap from autonomous to ligh and i have to migrate the configuration and i don't know how in this case.The client make 1 SSID with 2 differents auth method:"dot11 ssid PROD authentication open eap eap_methods authentication ne...
Pretty simple setup. 3 4400 controllers and a few access points for testing.The APs are already joined/registered to a particular controller but I need to move them to a 4402. All three controllers are part of a mobility group and I have access to ...
Does the 2006 WLC support LAG (i.e., logically connecting its 4 100 Mb/s ethernet ports together like EtherChannel)?Thanks
We have a 2000 wireless controller in Europe that supports several API's....The customers are able to see the wireless network, however no IP address would be dished out to them. In looking at the controller config in WCS, I noticed that the DHCP sco...
Hi All,I have an ASA 5510 and a 3500 XL switch. I have a Linksys AP, no routing on it; I want to secure it so that only internet can be accessed and not the internal network. I have a dhcp server on the network, will I need the router to give ips or ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-12-2024 05:27 AM | ||
04-10-2024 01:01 PM | ||
04-05-2024 06:44 PM | ||
04-04-2024 03:18 AM | ||
03-27-2024 07:38 AM |
User | Count |
---|---|
12 | |
4 | |
2 | |
2 | |
2 |